|
| MOQ: | 1 |
| 価格: | Customized |
| 標準パッケージ: | 合板ケース |
| 配達期間: | 30日 |
| 支払方法: | T/T |
| 供給能力: | 毎月10セット |
IEC 60529 IP5X IP6X Sand and Dust Test Chamber for Ingress Protection Testing of Electrical
Product Overview:
The Sand and Dust Test Chamber is specially designed to evaluate the resistance of electrical and electronic products, automotive and motorcycle components, and sealing parts against the ingress of sand and fine dust particles.
By simulating harsh sand and dust airflow conditions caused by natural environments or mechanical disturbances such as vehicle movement, this chamber helps assess the potential damaging effects of airborne particles on product enclosures, seals, and internal components during operation, storage, and transportation.
The test results provide reliable data for product design validation, quality control, and compliance with international ingress protection requirements.
Applicable Standards:
IEC 60529 – IP5X & IP6X (Figure 2)
IEC 60598-1:2008
IEC 60335-1 Clause 22.1
Other relevant international standards
Applications:
Electrical and electronic products
Automotive and motorcycle parts
Enclosures, housings, and sealing components
Dust-proof and ingress protection performance verification
Key Features:
Accurate simulation of sand and dust airflow environments
Adjustable negative pressure for enclosure protection testing
Uniform dust circulation and controlled dust concentration
PLC controller with touch screen for intuitive operation
Designed for long-duration and cyclic testing requirements
Technical Specifications:
| Category | Parameter | Specification |
|---|---|---|
| General | Model | SN441-216L |
| Inner chamber size | 600 × 600 × 600 mm (L×W×H) | |
| Outer dimensions | 850 × 1050 × 1800 mm (L×W×H) | |
| Load capacity | 10 kg | |
| Dust Characteristics | Dust type | Fine dust ≤ 75 μm |
| Metal mesh aperture | 50 μm | |
| Nominal line spacing | ≤ 75 μm | |
| Dust concentration | 2 kg/m³ | |
| Talcum powder dosage | 2 – 5 kg/m³ | |
| Airflow System | Airflow velocity | ≤ 2 m/s |
| Dust blowing direction | Vertical circulation (top to bottom) | |
| Circulation fan | Low-noise centrifugal fan with closed alloy motor | |
| Airflow meter range | 1 – 20 L/min | |
| Pressure & Vacuum | Negative pressure range | Adjustable from –10 kPa to 0 kPa |
| Preset pressure levels | –2 kPa / –5 kPa / –10 kPa | |
| Vacuum system | Vacuum pump, pressure regulating valve, nozzle, piping | |
| Temperature Control | Dust heating temperature | Ambient +10°C to 60°C |
| Heating method | Stainless steel mica heating sleeve | |
| Timing Functions | Dust blowing time | 1 s – 99 h (adjustable) |
| Test duration | 1 s – 99 h (adjustable) | |
| Vacuum time | 1 s – 99 h (adjustable) | |
| Dust blowing cycle | 1 s – 99 h (adjustable) | |
| Preset test time | 0.1 h – 9999.9 h | |
| Control System | Controller | PLC + touch screen |
| Control functions | Continuous / cyclic operation, time preset | |
| Sample power socket | Dust-proof socket AC 220V, 16A | |
| Chamber Construction | Inner chamber material | SUS201 mirror-finished stainless steel |
| Outer chamber material | A3 steel plate with electrostatic coating | |
| Observation window | 1 pc | |
| Lighting lamp | 1 pc | |
| Structure | Main components | Test chamber, dust circulation unit, vacuum system, heating system, flow valves, protective screen |
| Power Supply | Power supply | AC 380V, 3-phase, 5-wire, 50 Hz |
| Rated power | 3 kW (no load) | |
| Recommended air switch | Independent 32A with terminal blocks | |
| Power cable requirement | ≥ 4 mm² | |
| Operating Environment | Ambient temperature | 23 ± 5°C |
| Relative humidity | 25% – 70% RH | |
| Atmospheric pressure | 86 – 106 kPa | |
| Safety Protection | Safety devices | Phase sequence protection, leakage protection |
ビデオ
ビデオ
|
|
| MOQ: | 1 |
| 価格: | Customized |
| 標準パッケージ: | 合板ケース |
| 配達期間: | 30日 |
| 支払方法: | T/T |
| 供給能力: | 毎月10セット |
IEC 60529 IP5X IP6X Sand and Dust Test Chamber for Ingress Protection Testing of Electrical
Product Overview:
The Sand and Dust Test Chamber is specially designed to evaluate the resistance of electrical and electronic products, automotive and motorcycle components, and sealing parts against the ingress of sand and fine dust particles.
By simulating harsh sand and dust airflow conditions caused by natural environments or mechanical disturbances such as vehicle movement, this chamber helps assess the potential damaging effects of airborne particles on product enclosures, seals, and internal components during operation, storage, and transportation.
The test results provide reliable data for product design validation, quality control, and compliance with international ingress protection requirements.
Applicable Standards:
IEC 60529 – IP5X & IP6X (Figure 2)
IEC 60598-1:2008
IEC 60335-1 Clause 22.1
Other relevant international standards
Applications:
Electrical and electronic products
Automotive and motorcycle parts
Enclosures, housings, and sealing components
Dust-proof and ingress protection performance verification
Key Features:
Accurate simulation of sand and dust airflow environments
Adjustable negative pressure for enclosure protection testing
Uniform dust circulation and controlled dust concentration
PLC controller with touch screen for intuitive operation
Designed for long-duration and cyclic testing requirements
Technical Specifications:
| Category | Parameter | Specification |
|---|---|---|
| General | Model | SN441-216L |
| Inner chamber size | 600 × 600 × 600 mm (L×W×H) | |
| Outer dimensions | 850 × 1050 × 1800 mm (L×W×H) | |
| Load capacity | 10 kg | |
| Dust Characteristics | Dust type | Fine dust ≤ 75 μm |
| Metal mesh aperture | 50 μm | |
| Nominal line spacing | ≤ 75 μm | |
| Dust concentration | 2 kg/m³ | |
| Talcum powder dosage | 2 – 5 kg/m³ | |
| Airflow System | Airflow velocity | ≤ 2 m/s |
| Dust blowing direction | Vertical circulation (top to bottom) | |
| Circulation fan | Low-noise centrifugal fan with closed alloy motor | |
| Airflow meter range | 1 – 20 L/min | |
| Pressure & Vacuum | Negative pressure range | Adjustable from –10 kPa to 0 kPa |
| Preset pressure levels | –2 kPa / –5 kPa / –10 kPa | |
| Vacuum system | Vacuum pump, pressure regulating valve, nozzle, piping | |
| Temperature Control | Dust heating temperature | Ambient +10°C to 60°C |
| Heating method | Stainless steel mica heating sleeve | |
| Timing Functions | Dust blowing time | 1 s – 99 h (adjustable) |
| Test duration | 1 s – 99 h (adjustable) | |
| Vacuum time | 1 s – 99 h (adjustable) | |
| Dust blowing cycle | 1 s – 99 h (adjustable) | |
| Preset test time | 0.1 h – 9999.9 h | |
| Control System | Controller | PLC + touch screen |
| Control functions | Continuous / cyclic operation, time preset | |
| Sample power socket | Dust-proof socket AC 220V, 16A | |
| Chamber Construction | Inner chamber material | SUS201 mirror-finished stainless steel |
| Outer chamber material | A3 steel plate with electrostatic coating | |
| Observation window | 1 pc | |
| Lighting lamp | 1 pc | |
| Structure | Main components | Test chamber, dust circulation unit, vacuum system, heating system, flow valves, protective screen |
| Power Supply | Power supply | AC 380V, 3-phase, 5-wire, 50 Hz |
| Rated power | 3 kW (no load) | |
| Recommended air switch | Independent 32A with terminal blocks | |
| Power cable requirement | ≥ 4 mm² | |
| Operating Environment | Ambient temperature | 23 ± 5°C |
| Relative humidity | 25% – 70% RH | |
| Atmospheric pressure | 86 – 106 kPa | |
| Safety Protection | Safety devices | Phase sequence protection, leakage protection |
