|
| MOQ: | 1 |
| 価格: | Customized |
| 標準パッケージ: | 合板ケース |
| 配達期間: | 30日 |
| 支払方法: | T/T |
| 供給能力: | 毎月20セット |
The IEC 62133 Battery Enclosure Pressure Test System is a specialized safety testing solution designed to simulate internal pressure conditions in rechargeable batteries. Equipped with an advanced PLC control system, this equipment ensures precise pressure regulation, real-time monitoring, and enhanced operational safety.
It is widely used in lithium battery testing, quality inspection laboratories, and R&D environments to verify battery safety performance under extreme conditions.
| Test station | 1 station |
|---|---|
| Control method | PLC control and touch screen operation |
| Drive mode | Booster pump driver |
| Test medium | Gas |
| Test pressure | 0.01-2.5mpa, pressure sensor monitoring |
| Gas capacity |
20-100ml is adjustable and can be realized (20, 30, 50, 100ml)
|
| Test time | 0-999999s can be set |
| Sealing joint | One set as standard, orifice Φ2.85±0.05mm |
| Test process | Manual loading and unloading test, automatic detection process |
| Use environment | Atmospheric pressure 80~106kpa, ambient temperature 5~40°C, relative humidity (20~80) %RH, place of use: no violent shaking, vibration, no electromagnetic interference, no dust, no explosive and corrosive gases, good heat dissipation |
| Equipment size | About 1000×750×900 (mm) W×H×D |
| Equipment weight | 110kg |
| Power requirements | Power supply: AC220V±10%/50-60Hz, use environment: working temperature 0-40℃, humidity 30%-90% |
ビデオ
ビデオ
ビデオ
ビデオ
ビデオ
|
|
| MOQ: | 1 |
| 価格: | Customized |
| 標準パッケージ: | 合板ケース |
| 配達期間: | 30日 |
| 支払方法: | T/T |
| 供給能力: | 毎月20セット |
The IEC 62133 Battery Enclosure Pressure Test System is a specialized safety testing solution designed to simulate internal pressure conditions in rechargeable batteries. Equipped with an advanced PLC control system, this equipment ensures precise pressure regulation, real-time monitoring, and enhanced operational safety.
It is widely used in lithium battery testing, quality inspection laboratories, and R&D environments to verify battery safety performance under extreme conditions.
| Test station | 1 station |
|---|---|
| Control method | PLC control and touch screen operation |
| Drive mode | Booster pump driver |
| Test medium | Gas |
| Test pressure | 0.01-2.5mpa, pressure sensor monitoring |
| Gas capacity |
20-100ml is adjustable and can be realized (20, 30, 50, 100ml)
|
| Test time | 0-999999s can be set |
| Sealing joint | One set as standard, orifice Φ2.85±0.05mm |
| Test process | Manual loading and unloading test, automatic detection process |
| Use environment | Atmospheric pressure 80~106kpa, ambient temperature 5~40°C, relative humidity (20~80) %RH, place of use: no violent shaking, vibration, no electromagnetic interference, no dust, no explosive and corrosive gases, good heat dissipation |
| Equipment size | About 1000×750×900 (mm) W×H×D |
| Equipment weight | 110kg |
| Power requirements | Power supply: AC220V±10%/50-60Hz, use environment: working temperature 0-40℃, humidity 30%-90% |
