logo
製品
商品の詳細
> 製品 >
IEC62560 Clause 15 Figure 8 Lamp Testing Equipment for Non Dimmable Lamps Compliance Test

IEC62560 Clause 15 Figure 8 Lamp Testing Equipment for Non Dimmable Lamps Compliance Test

MOQ: 1
価格: 交渉可能
標準パッケージ: カートン
配達期間: 15日
支払方法: T/T
供給能力: 毎月20セット
詳細情報
起源の場所
中国
ブランド名
Sinuo
証明
Calibration Certificate (Cost Additional)
モデル番号
SN9927
適用される標準:
IEC 62560
適用される条項:
第15条
入力電圧:
AC 264V以下
出力電流:
2A以下
テストステーション:
単局
動作モード:
動作モード
ハイライト:

IEC62560 lamp testing equipment

,

non dimmable lamp compliance tester

,

LED testing equipment with warranty

製品説明
IEC62560 Clause 15 Figure 8 Lamp Testing Equipment for Non Dimmable Lamps Compliance Test
This testing equipment is specifically designed to meet the requirements of IEC 62560 Clause 15, providing a reliable and standardized solution for evaluating the performance of non-dimmable self-ballasted LED lamps. The system simulates the electrical conditions defined in the Figure 8 test circuit, ensuring accurate verification of lamp compliance, stability, and operational characteristics under specified conditions.
IEC62560 Clause 15 Figure 8 Lamp Testing Equipment for Non Dimmable Lamps Compliance Test 0
Key Features
  • Fully compliant with IEC 62560 Clause 15 testing requirements
  • Designed for non-dimmable self-ballasted LED lamps
  • Accurate simulation of Figure 8 circuit conditions
  • Stable and reliable electrical performance testing
  • Easy operation with user-friendly interface
  • High repeatability for consistent test results
Technical Parameters
Parameter Specification
Input voltage AC ≤ 264V 50Hz
Output current ≤ 2A
Operation Procedure
15. Abnormal Operation Testing
Self-ballasted lamps shall not create hazard under abnormal operating conditions. Self-ballasted lamps shall be constructed so that as a result of abnormal or careless operation, the risk of fire and mechanical damage impairing safety of protection against electric shock is obviated. Applying non-dimmable self-ballasted lamps on a dimmer or an electronic switch is to be tested as a possible case of abnormal operation.
Test Procedure
  1. Test non-dimmable lamp in test circuit shown in figure 8
  2. Determine R1 and S1 setting at which the maximum I r.m.s occurs
  3. Test at this situation, and if the lamp passively fails within 60 min, repeat the test at 10% lower I r.m.s
  4. The lower I r.m.s shall be set in the decreasing potentiometer resistance direction
  5. Repeat this procedure until stable operation is achieved for minimum 60 min
IEC62560 Clause 15 Figure 8 Lamp Testing Equipment for Non Dimmable Lamps Compliance Test 1 IEC62560 Clause 15 Figure 8 Lamp Testing Equipment for Non Dimmable Lamps Compliance Test 2 IEC62560 Clause 15 Figure 8 Lamp Testing Equipment for Non Dimmable Lamps Compliance Test 3
製品
商品の詳細
IEC62560 Clause 15 Figure 8 Lamp Testing Equipment for Non Dimmable Lamps Compliance Test
MOQ: 1
価格: 交渉可能
標準パッケージ: カートン
配達期間: 15日
支払方法: T/T
供給能力: 毎月20セット
詳細情報
起源の場所
中国
ブランド名
Sinuo
証明
Calibration Certificate (Cost Additional)
モデル番号
SN9927
適用される標準:
IEC 62560
適用される条項:
第15条
入力電圧:
AC 264V以下
出力電流:
2A以下
テストステーション:
単局
動作モード:
動作モード
最小注文数量:
1
価格:
交渉可能
パッケージの詳細:
カートン
受渡し時間:
15日
支払条件:
T/T
供給の能力:
毎月20セット
ハイライト

IEC62560 lamp testing equipment

,

non dimmable lamp compliance tester

,

LED testing equipment with warranty

製品説明
IEC62560 Clause 15 Figure 8 Lamp Testing Equipment for Non Dimmable Lamps Compliance Test
This testing equipment is specifically designed to meet the requirements of IEC 62560 Clause 15, providing a reliable and standardized solution for evaluating the performance of non-dimmable self-ballasted LED lamps. The system simulates the electrical conditions defined in the Figure 8 test circuit, ensuring accurate verification of lamp compliance, stability, and operational characteristics under specified conditions.
IEC62560 Clause 15 Figure 8 Lamp Testing Equipment for Non Dimmable Lamps Compliance Test 0
Key Features
  • Fully compliant with IEC 62560 Clause 15 testing requirements
  • Designed for non-dimmable self-ballasted LED lamps
  • Accurate simulation of Figure 8 circuit conditions
  • Stable and reliable electrical performance testing
  • Easy operation with user-friendly interface
  • High repeatability for consistent test results
Technical Parameters
Parameter Specification
Input voltage AC ≤ 264V 50Hz
Output current ≤ 2A
Operation Procedure
15. Abnormal Operation Testing
Self-ballasted lamps shall not create hazard under abnormal operating conditions. Self-ballasted lamps shall be constructed so that as a result of abnormal or careless operation, the risk of fire and mechanical damage impairing safety of protection against electric shock is obviated. Applying non-dimmable self-ballasted lamps on a dimmer or an electronic switch is to be tested as a possible case of abnormal operation.
Test Procedure
  1. Test non-dimmable lamp in test circuit shown in figure 8
  2. Determine R1 and S1 setting at which the maximum I r.m.s occurs
  3. Test at this situation, and if the lamp passively fails within 60 min, repeat the test at 10% lower I r.m.s
  4. The lower I r.m.s shall be set in the decreasing potentiometer resistance direction
  5. Repeat this procedure until stable operation is achieved for minimum 60 min
IEC62560 Clause 15 Figure 8 Lamp Testing Equipment for Non Dimmable Lamps Compliance Test 1 IEC62560 Clause 15 Figure 8 Lamp Testing Equipment for Non Dimmable Lamps Compliance Test 2 IEC62560 Clause 15 Figure 8 Lamp Testing Equipment for Non Dimmable Lamps Compliance Test 3
地図 |  プライバシーポリシー | 中国 良い 品質 電化製品の試験装置 提供者 著作権 2019-2026 Sinuo Testing Equipment Co. , Limited . すべて 確保される権利。