|
| MOQ: | 1 |
| 価格: | Customized |
| 標準パッケージ: | Aluminium Box |
| 配達期間: | 3 Days |
| 支払方法: | T/T |
| 供給能力: | 100 sets per month |
Test Probe A with Built-in Force for IEC61032 IP1X Safety Compliance
Product information:
It conforms to the standard requirements of IEC61032 fig.1, it is required by IEC 60335-1 clause 22.1, IEC60529 IP1X , IEC60065, etc. This probe is intended to verify protection the back of hand of persons against access to hazardous parts. It is also the necessary probe used to prevent the hazardous parts and solid foreign objects from entering.
This test probe can be customized. It can be used for anti-electric shock test when equipped with alligator clip. Or used for enclosure protection test when open threaded hole of M6 at the end of the handle (connected with pull and push dynamometer). The probe whose model number is with "T" is with force.
Technical parameters:
| Parameters /Model | SN2210-1T |
| Name | Test probe A with force |
| Sphere diameter | SФ50+0.05 0(mm) |
| Guard diameter | Ф45±0.2(mm) |
| Handle diameter | Ф10(mm) |
| Guard thickness | 4(mm) |
| Handle length | 100(mm) |
| Built-in Force | With built-in force of 0~50N, resolution of 5N |
ビデオ
ビデオ
ビデオ
ビデオ
ビデオ
|
|
| MOQ: | 1 |
| 価格: | Customized |
| 標準パッケージ: | Aluminium Box |
| 配達期間: | 3 Days |
| 支払方法: | T/T |
| 供給能力: | 100 sets per month |
Test Probe A with Built-in Force for IEC61032 IP1X Safety Compliance
Product information:
It conforms to the standard requirements of IEC61032 fig.1, it is required by IEC 60335-1 clause 22.1, IEC60529 IP1X , IEC60065, etc. This probe is intended to verify protection the back of hand of persons against access to hazardous parts. It is also the necessary probe used to prevent the hazardous parts and solid foreign objects from entering.
This test probe can be customized. It can be used for anti-electric shock test when equipped with alligator clip. Or used for enclosure protection test when open threaded hole of M6 at the end of the handle (connected with pull and push dynamometer). The probe whose model number is with "T" is with force.
Technical parameters:
| Parameters /Model | SN2210-1T |
| Name | Test probe A with force |
| Sphere diameter | SФ50+0.05 0(mm) |
| Guard diameter | Ф45±0.2(mm) |
| Handle diameter | Ф10(mm) |
| Guard thickness | 4(mm) |
| Handle length | 100(mm) |
| Built-in Force | With built-in force of 0~50N, resolution of 5N |
